Mi-T-M’s recycle systems are designed to remove free hydrocarbons and filter the water to be sent back through a pressure washer. The systems come standard with pH and ORP injection, and are designed for corrosion resistance by utilizing poly tanks and recycled-plastic skids.

Product Features:

These wash-water recycle systems combine enhanced design with state-ofthe-art technology to offer:

• Cone-shaped tank for easy handling of accumulated solids
• Quality recycled wash-water without common odor problems
• Easy operation and maintenance
• Heavy-duty, corrosive-resistant base for years of maintenance-free operation
• CSA approved control panel meets the requirements of the US and Canadian standards for an Industrial Control Panel

Other features:

• CSA listed NEMA-4 rated corrosion-proof control panel for safe and reliable operation
• Hose connectors are designed for easy accessibility and quick installation; the connectors are clearly marked
• Pumps are easily accessible
• Recommended Mi-T-M Air Compressor AC1-HE02-05M1 for use with the auto-backwash models

Untreated wash-water is introduced into the system via a 1.0 HP surface-mount sump pump.

Clarifier Oil/Water/Solids Separator

As the water flows through the cone-shaped oil/water/solids separator, it changes directions countless times as the water is directed and redirected through cone baffles, and hundreds of square feet of oleophilic (oil attracting) coalescing media.

Mechanically emulsified oil particles are attracted from the water to the oleophilic media, and float to the surface. Once on the surface, the oil is skimmed off into an oil decanter for easy disposal.

Fine silt and particulates are dropped to the bottom of the cone for easy flushing and disposal of the accumulated solids.

Corona Discharge Ozone Injection

Water in the cone tank is injected with a high concentration of ozone via a corona discharge ozone injector system, tiny bubbles saturate the water in the cone tank, killing live bacteria instantly on contact.

Oil skimmed from the surface of the clarifier tank is captured in a conveniently located oil decanter. Oil can be removed easily for appropriate disposal.

Solids Separator Chamber

Solids from the wastewater stream settle at the base of the clarifier tank.

With the opening of a single valve, solids are easily dropped into a bag filter for effective capture and easy disposal.

The bag filter is suspended on a de-watering tray with drainage returning to the in-ground pits.

Customized Multi-Media Filter (located at the back of the skid)

Once the water has been treated for oil and solids removal, it is then pushed through a customized multi-media filter which contains a special media blend to filter out particulates down to 25 microns.

Once the larger particulates are removed, the water is then filtered through hundreds of square feet of reusable polyester 30 micron filters. (Not used on auto backwash models)

Activated Carbon Filter

The final treatment stage of the system occurs as the water is filtered through activated carbon which absorbs hydrocarbons, herbicides, pesticides, some metals and dozens of the carbon-based constituents. Activated carbon also works as a polisher for treated water to remove chlorides.

ORP/pH Controller

For longer term control of bacteria, the ORP injection system automatically measures and injects a germicide to control
odor by killing odor-causing bacteria. The automatic pH control system keeps the water at an appropriate pH level so the germicide is effective at killing bacteria and controlling odor.

Treated Water Holding Tank

Treated water is delivered for reuse at 30 PSI to 50 PSI via a pressurized water storage tank.

Electrical Control Panel

NEMA-4 rated corrosion-proof control panel for safe and reliable operation. CSA listed.